How to Pair Doorbell Viewers with CCTVs for Maximum Home Protection

How to Pair Doorbell Viewers with CCTVs for Maximum Home Protection

If you are really serious about maximizing the security of your home or business premises, you cannot just stop with Closed Circuit TVs. You might even have a lot of Closed Circuit TVs distributed all over the place at many strategic angles. This is all well and good, but it’s only a good start. If you want to really provide a full blanket of security options in your premises to maximize your peace of mind, you need to take the extra step. The extra step, in this case, is to buy door peephole cameras.

Now, let’s get one thing straight-most homeowners define home security and home security layouts primarily in terms of alarm systems, CCTV cameras, and, most common, a guard dog. While these are important, you have to focus on creating a complete security system for your home. This involves covering as many different places as possible. This involves getting recorded footage shot at many different angles as possible. Let’s face it-there’s no telling how and when criminals will set foot on your home’s premises. They can take all sorts of approaches. If they are truly skilled or have been around the block one too many times, they would approach your home in a way you probably did not expect. This is why you have to insist on a home security setup that has all angles covered.

A huge chunk of any kind of security is deterrence. People should be put on notice that if they are doing something they should not be doing, they will get caught. One of the best ways to catch them is to shoot footage of them doing an illegal or improper act. Whether we’re talking about your employees or total strangers, it doesn’t really matter. For this deterrent effect to truly take hold, it must come from many different sources. This is why door peephole cameras should be a key part of your premises’ overall security infrastructure. Keep in mind that they should not be replacements for CCTV’s. They should be supplemental pieces of information. In other words, they provide an added layer of security, but they do not replace CCTV’s and other security equipment.

Deterrence is crucial

Which would you rather have? Avoiding a fire or having to pick through the debris after the fire? The answer for most people is quite obvious. You’d rather spend more money on prevention than to hustle with a heartbreak of picking up the pieces. The same applies to security. A little of deterrence goes a long way because even if you have the best security, but it focuses on things that take place after the fact, this is too little too late. You’re simply a day late and a buck short. The best part about deterrence is that whatever money you spend on it, that sum of cash will never ever, not even in a million years, come close to matching the dollar value of the sense of violation and vulnerability you suffer when your home’s security is breached or compromised.

You don’t want to be placed at that position because it’s much harder to become whole again than it is to remain whole in the first place. This is why it’s crucial for CCTV units to be supplemented properly by peephole cameras in a strategic way. They have to be visible and unreachable. You have to make sure they cannot be easily trampled with. Also, you have to use a centralized layout that maximizes security. They have to be able to get as many different angles of the actions as possible to record proper footage. The bottom line is you need footage that is very clear and easy to figure out.

Also, they have to be at many different angles so you can get shots of the action. There should be no guesswork involved regarding the kind of objects or actions people are looking at. It should be very easy to interpret. Plan your system with all these in mind and you would truly benefit from the tremendous amount of security and peace of mind door peephole cameras bring to the table. Drop the ball with any of these factors, then you are basically playing the game in the wrong way. It’s all back to being a day late and a buck short. Again, use a centralized layout, use multiple angles, plan your system with energy savings in mind, focus on image clarity and pair with clear and bright sources. It’s all about strategy, proper layout and investing in an ounce of prevention so that you don’t have to hassle with pounds of cure later.

The topic of this blog post might throw you a bit off. You might be thinking that this is very straight forward. You might be thinking it’s so straight forward and simple that there’s really no need for a blog post for it. After all, how complicated can be installing door peephole cameras. The issue is not so much about installation. Installation, after all, is just all about following instructions. Instead, this blog post talks about designing your home’s total security system. A lot of people think that putting together a total security system is something you do by the seat of your pants. You can allow yourself to be guided by a simple inspiration and end up with the right security system.

That’s too much to hope for because just like with anything else you do by the seat of your pants, it’s too easy to screw things up. It’s too easy to buy things you have no business buying. It’s too easy to overlook things you should have bought. All sorts of problems could occur and in the end of the process, you don’t get the security you bargained for in the first place. I don’t want that to happen to you. That’s why I come up with this article to help you add door peephole cameras to your home’s total security system in the right way.

The advice outlined here enables you to add a security layer in a systematic and methodical way. Just go through the steps to ensure that you go about doing things in the right way. As you probably already know, just like with anything else in life, there are always two ways to do things. You can always choose to do things in the right way or the wrong way. Unfortunately, doing things in the wrong way is also the most expensive way. Do yourself a tremendous favor and save a lot of time, effort, and energy by using the step by step approach described below.

Map out your home

The first thing you need to do is come up with a graphical representation of what your home looks like. This means you need to come up with your home’s floor plan. You need to map out all the interior spaces of your home. You need to do this so you can have a clear idea of the space you are working with.

Plan out the angles

Now that you have a clear idea of the interior spaces you want to provide security for. The next step is to look at the angles you have. This is really important because you want to put Closed Circuit TV cameras in the right places. This maximizes the angles they can move, the range of action and the vista in view of the footage they will be shooting. The same applies to your door peephole cameras. You’re going to have a lot of doors. You also have a lot of indoor space next to those doors. Once you have a floor map of your home, you can plan out the angles to maximize the security value of whatever door peephole camera you install.

Maximize lighting at all times

While working with the angles you are looking forward to cover with your security network, try to install the proper amount of lighting. This doesn’t necessarily mean you have to install a ton of lighting. This doesn’t mean you have to go overboard as far as lighting fixtures are concerned. These are totally different concerns. Instead, make sure there is enough artificial or natural light illuminating the angles you want your security cameras to exploit. Whether you’re using peephole cameras or traditional CCTV cameras, there has to be enough lighting to maximize the value of those security angles.

Maximize clarity at all times

If you do everything properly, then clarity by definition is maximized. You are recording footage at the right angles, and these areas are properly lit. This increases the likelihood that whatever footage you do manage to shoot on 24/7, 365-day basis, would be very easy to view. The last thing you want is to shoot security footage that is very fuzzy, hazy or otherwise full of static. You are going to be making all sorts of decisions later on with this footage. Maybe, it would be presented in court. Maybe, it would be presented to insurance claim’s adjusters. Whatever the case may be, you would need to do something with the footage. Unfortunately, if the footage is very hard to view because you can’t make heads or tails of the images contained by the footage, then the footage is essentially worthless. Use multiple angles and optimal lighting to increase the overall clarity and quality of the footage shot by the security cameras on your premises.

Share with friends

One Response

  1. Ronnie Warren

Leave a Reply