The topic of this blog post might throw you a bit off. You might be thinking that this is very straight forward. You might be thinking it’s so straight forward and simple that there’s really no need for a blog post for it. After all, how complicated can be installing door peephole cameras. The issue is not so much about installation. Installation, after all, is just all about following instructions. Instead, this blog post talks about designing your home’s total security system. A lot of people think that putting together a total security system is something you do by the seat of your pants. You can allow yourself to be guided by a simple inspiration and end up with the right security system.
That’s too much to hope for because just like with anything else you do by the seat of your pants, it’s too easy to screw things up. It’s too easy to buy things you have no business buying. It’s too easy to overlook things you should have bought. All sorts of problems could occur and in the end of the process, you don’t get the security you bargained for in the first place. I don’t want that to happen to you. That’s why I come up with this article to help you add door peephole cameras to your home’s total security system in the right way.
The advice outlined here enables you to add a security layer in a systematic and methodical way. Just go through the steps to ensure that you go about doing things in the right way. As you probably already know, just like with anything else in life, there are always two ways to do things. You can always choose to do things in the right way or the wrong way. Unfortunately, doing things in the wrong way is also the most expensive way. Do yourself a tremendous favor and save a lot of time, effort, and energy by using the step by step approach described below.
Map out your home
The first thing you need to do is come up with a graphical representation of what your home looks like. This means you need to come up with your home’s floor plan. You need to map out all the interior spaces of your home. You need to do this so you can have a clear idea of the space you are working with.
Plan out the angles
Now that you have a clear idea of the interior spaces you want to provide security for. The next step is to look at the angles you have. This is really important because you want to put Closed Circuit TV cameras in the right places. This maximizes the angles they can move, the range of action and the vista in view of the footage they will be shooting. The same applies to your door peephole cameras. You’re going to have a lot of doors. You also have a lot of indoor space next to those doors. Once you have a floor map of your home, you can plan out the angles to maximize the security value of whatever door peephole camera you install.
Maximize lighting at all times
While working with the angles you are looking forward to cover with your security network, try to install the proper amount of lighting. This doesn’t necessarily mean you have to install a ton of lighting. This doesn’t mean you have to go overboard as far as lighting fixtures are concerned. These are totally different concerns. Instead, make sure there is enough artificial or natural light illuminating the angles you want your security cameras to exploit. Whether you’re using peephole cameras or traditional CCTV cameras, there has to be enough lighting to maximize the value of those security angles.
Maximize clarity at all times
If you do everything properly, then clarity by definition is maximized. You are recording footage at the right angles, and these areas are properly lit. This increases the likelihood that whatever footage you do manage to shoot on 24/7, 365-day basis, would be very easy to view. The last thing you want is to shoot security footage that is very fuzzy, hazy or otherwise full of static. You are going to be making all sorts of decisions later on with this footage. Maybe, it would be presented in court. Maybe, it would be presented to insurance claim’s adjusters. Whatever the case may be, you would need to do something with the footage. Unfortunately, if the footage is very hard to view because you can’t make heads or tails of the images contained by the footage, then the footage is essentially worthless. Use multiple angles and optimal lighting to increase the overall clarity and quality of the footage shot by the security cameras on your premises.